ADVENTURER BALANCES
EN-15
4.4
Dynamic Weighing
Note:
Before using any application, be sure the balance has been leveled and calibrated.
Use this application to weigh an unstable load, such as a moving animal. Two different start/reset modes can be
selected:
Manual
(start and stop via key press) and
Automatic
(start and stop automatically).
Dynamic Weighing
– Manual (default)
1. In the upper left portion of the home screen, select Dynamic Weighing
2. Place objects on the pan and press the
Start
button.
The
Dynamic Weighing
Home screen
Main Display Line
Reference Fields
Application Buttons
Application
Icon
3. The balance begins a countdown (averaging process). During the countdown, the information line
displays the time remaining.
If necessary, press
Stop
to quit.
4. When the countdown ends, the result line is displayed and held. Press
Clear
to clear the held weight and
return to the initial screen.
Note:
Clear the pan before beginning a new Dynamic weighing cycle.
4.4.1
Item Settings
To view or adjust the current settings
Touch the
Item Settings
button. The Settings screen
appears.
Averaging Time:
Set the averaging time to a value
between 1 and 99 seconds. Default is 5 seconds.
Automatic Mode:
When set to On, the cycle begins
when an object is placed on the pan, and the held value
is automatically reset when the object is removed from
the pan.
Sample Name:
Assign a name to the sample.
Print settings:
Change printing settings. See section 7
for more information.
Note:
The
Save to USB
button will only appear after a
USB flash drive has been connected to the balance.
See section 4.1.3 for more information.
