Adventurer Pro
EN-15
Editing Limits
The limits are edited one digit at a time. The
digit being edited is blinking. Its value can be
incremented by pressing the
No
button or
decremented by pressing the
Back
button.
When the desired value is displayed, press the
Yes
button to accept the value and proceed to
the next digit. When all digits have been edited,
the new limit value is shown (blinking) on the
secondary display. Press the
Yes
button to
accept the new limit value or the
No
button to
edit the limit value. When editing of the Over
limit is complete, Check Weighing begins.
Checkweighing
Place the sample on the pan. The UNDER/
ACCEPT/OVER status is shown on the primary
display while the actual weight of the item is
shown on the secondary display.
3.5.4 Check Weighing (Cont.)
3.5.5 Animal Weighing
Enter this mode to weigh unstable loads such as a moving animal. Refer to paragraph 3.4.3 to
enable Animal Weighing.
USE
The balance alternately shows READY and
ANIMAL on the secondary display.
Start Animal Cycle
Automatic and Semi-Automatic Mode
The animal cycle begins when an animal is
placed on the pan.
Manual Mode
The animal cycle begins when the
Function
button is pressed.
During Animal Cycle
The primary display shows the countdown from
the level setting (5, 10 or 15 seconds) to AWO.
The secondary display alternately shows
ANIMAL and BUSY.
Summary of Contents for Adventurer Pro AV53
Page 2: ......
