Service Manual
Page 13 of 50
2. Installation
Before installing your Aviator scale, identify the best location for your new equipment. A suitable installation
environment enhances operation and ensures a long life of the scale. Keep in mind the following factors,
which might have a negative influence on the scale's performance:
n
Vibration diminishes the scal
e’s ability to measure accurately. Excessive vibration from equipment such
as conveyors can cause inaccurate and non-repeatable readings.
n
Be sure the scale is leveled properly.
n
Air currents can also diminish a scale’s performanc
e.
n
Avoid placing the scale in front of or directly under air vents.
n
Other than items being weighed, avoid any objects rubbing or pressing against any part of the scale.
2.1. Safety Precautions
In order to prevent accidents at work, the installer is required to take actions, directions and measures that
comply with the general regulations for the prevention of industrial accidents, all other valid regulations for
the prevention of accidents and with all other generally recognized regulations relating to safety and
occupational health.
2.2. Ambient Conditions
The right location is critical to weighing accuracy. Ideal locations comply with the following conditions:
n
No shocks and vibrations.
n
No excessive temperature fluctuations.
n
No direct sunlight.
n
Select a vibration-free location for your scale.
3. Entering Operator Configuration Setup
Modification of operational setup parameters will allow adjusting the functionality of the system to working
requirements.
Enter Setup:
1. When unit price is 0, Press the Manu key for around 3 seconds.
2. After hearing a long beep, the display will show
“
SET 1 OP
”
.
3. Push ON/OFF key to enter operator configuration.
