BW SERIES COMPACT BENCH SCALE EN-11
7. MAINTENANCE
7.1 Cleaning
Comply with safety precautions when cleaning and maintaining the scale
• Turn off and disconnect the scale from the power supply during cleaning.
•
DO NOT
open the scale; no user repairable components inside. Service
should be performed by authorized personnel only.
•
DO NOT
place the scale upside down. If accessing the bottom, place the
scale on its side.
•
DO NOT
carry the scale by the pan or sub-platform. Use the handholds on
the sides of the scale housing.
•
DO NOT
allow liquids to enter the scale.
•
DO NOT
use high pressure when cleaning the scale.
• Inspect the scale regularly. Ensure that the housing, pan and sub-platform
are clean and free from foreign material.
• Wipe the exterior components of the scale using a soft cloth dampened with
water and a mild detergent (
DO NOT
use acids, alkalis, strong solvents or
abrasive cleaning agents).
• Screw in all 4 leveling feet tightly to avoid entry of water inside the scale
during cleaning. However, when the scale is put back into operation,
remember to loosen the two rear feet (and adjust leveling accordingly) to
allow proper air flow and minimize condensation inside the scale.
• Plug the rubber cap to the adapter receptacle underneath the scale to avoid
entry of water inside the scale.
• The pan is dishwasher safe and may be placed with normal loads. All other
parts must not be placed in a dishwasher.
