BW SERIES COMPACT BENCH SCALE EN-7
• The LED indication is complemented by an audible alert feature (Sec. 5.2).
• Over-Under values are retained when the unit is turned off.
• Over-Under values are not retained when the weighing unit or resolution
setup are changed.
5. SCALE SETTINGS
5.1 Accessing the User Setup Mode
With the scale on, press
ON/UNITS
OFF
and
CHECK
simultaneously.
“SETUP”
then
“S1 OFF”
is displayed. To navigate in the User Setup Mode:
• Press
ON/UNITS
OFF
-Yes
to accept the displayed setting
• Press
TARE-No
to toggle through available settings
• Press
ZERO-Exit
to end setup and proceed to “Save”
• Press
CHECK-Back
to revert to the previous parameter
5.2 User Setup Parameters
Parameters
Description
Settings
S1
Scale automatically turns off after 15
minutes of inactivity.
ON - enables this function.
OFF
-disables this function.
S2
Scale enters sleep mode after 2
minutes of inactivity.
ON
- enables this function.
OFF -disables this function.
S3
CHECK activation and Alert Range
0
- Check mode is off.
Scale beeps when displayed weight is:
1-...within the preset Over and Under values
2-...outside the preset Over and Under range
3-...within the preset Over and Under values (Over-Under LED’s do not
light within preset range)
4-...outside the preset Over and Under range (Over-Under LED’s do not
light within preset range)
5- Alarm is off (Over-Under LED’s do not light within preset range)
6- Alarm is off
S4
Averaging Level
0, 1,
2
, 3 (most filtering, longer stabilization time)
4, 5, 6, 7 (corresponds to 0, 1, 2, 3 but with slower display update)
S5
Power-on Weighing Unit
lb
, oz, g
S6
LED Brightness Level
0
,1,2,3 (dimmest).
dsp
Display Type
OFF
- displays weight continuously.
ON - displays first stable weight.
Save
Save or Abort
Save
- saves changes and reverts to weighing mode.
Abort - reverts to weighing mode without saving changes.
Note
: Bold settings are defaults.
