DEFENDER 3000 Series Drum Scale
EN-1
INTRODUCTION
This manual contains installation, operation and maintenance instructions for the DEFENDER 3000 Series Drum
Scale.
SAFETY PRECAUTIONS
CAUTION: Read all safety warnings before installing, making connections, or servicing this
equipment. Failure to comply with these warnings could result in personal injury and/or property
damage. Retain all instructions for future reference.
Verify that the AC adapter
’
s input voltage range and plug type are compatible with the local AC mains power
supply.
Make sure that the power cord does not pose a potential obstacle or tripping hazard.
Do not position the equipment such that it is difficult to reach the power connection.
Operate the equipment only under ambient conditions specified in these instructions.
Do not operate the equipment in wet, hazardous or unstable environments.
The foundation at the installation site must be capable of safely supporting the weight of the Drum Scale plus
the weight of the maximum load.
Ensure that vibrations due to machinery near the installation site are kept to a minimum.
Disconnect the equipment from the power supply when cleaning.
Use only approved accessories and peripherals.
Service should only be performed by authorized personnel.
Intended Use
Use the equipment exclusively for weighing, as described in these operating instructions. Any other type of use
and operation beyond the limits of technical specifications, without written consent from OHAUS, is considered as
not intended. This instrument complies with current industry standards and the recognized safety regulations;
however, it can constitute a hazard in use. If the instrument is not used according to these operating instructions,
the intended protection provided by the instrument may be impaired.
