EN-28 Defender 5000 Indicators
Note:
Custom Unit is locked at Off position when the Security Switch is set to the locked position.
Custom Unit is not available when Range is set to Dual interval.
Set the status.
Off
= Disabled
On = Enabled
3.8 GLP/GMP Menu
Enter this menu to set the Good Laboratory Practice (GLP) or Good Manufacturing Practice (GMP)
data.
3.8.1 Date Format
Set the date format.
MM/DD/YYYY = Month.Day.Year
DD/MM/YYYY = Day.Month.Year
YYYY/MM/DD = Year.Month.Day
3.8.2 Date
Set the date.
00 to 9999 = year position
01 to 12 = month position
01 to 31 = day position
Refer to Section 3.2 Menu Navigation to enter settings.
3.8.3 Time Format
Set the time format.
24 hr = 24 hour format.
12 hr = 12 hour format.
3.8.4 Time
Set the time.
24 hour format
00 to 23 = hour position
00 to 59 = minute position
3.8.5 Project ID
Set the Project identification.
Refer to Section 3.2 Menu Navigation to enter settings.
3.8.6 Scale ID
Set the Project identification.
Refer to Section 3.2 Menu Navigation to enter settings.
3.8.6 Reset
If Reset is selected and confirmed, all the submenu value will be set to default.
