Defender 5000 Indicators
EN-33
4. OPERATION
The scale can be configured to operate in up to 5 Application modes (Scale can be set to have 1 or
more Applications modes active). Press the button
Mode
to select an activated application. The
current application will be shown in the upper left corner of the home screen.
TD52 Indicator incorporates the following Applications:
Weighing
Counting
Check
Weighing/Counting
Percent
Dynamic
4.1 Weighing
Use this application to determine the weight of items in the selected unit of measure.
Press
the
button
until
the
icon
corresponding to
Weighing
is displayed in the
screen (this application is the default).
Press
Tare
or
Zero
if necessary to begin.
Place objects on the pan to display the weight. When
the reading is stable, the
*
appears.
The resulting value is displayed in the screen in the
active unit of measure.
4.1.1 Application Setup
The Application can be customized for various user preferences.
Press the button corresponding to the icon
to enter
Configuration
.
The
Configuration
screen
is now displayed.
Select the list item and press the Softkey
corresponding to the icon
to change the
setting as desired.
To return to the Application home screen, press
the Softkey corresponding to the icon
.
The Weighing Configurations are defined below
(defaults in
Bold
)
Item
Available Settings
Comments
Auto Tare
On,
Off
To enable Automatic Tare
Accumulate
Off
, Automatic, Manual To enable Accumulation / Totalization
4.1.2 Auto Tare
Set the automatic tare.
Off: Auto tare is turned off.
On: The first stable weight (>=5d) will be tare as a
container automatically.
Note: If the Security Switch is set to ON, Auto
Tare is locked at the current setting.
