Defender
™
7000
Quick Start Guide
Defender™ 7000
(with T71 Indicators)
ii
Ohaus Corporation www.ohaus.com
SAFETY PRECAUTIONS
For safe and dependable operation of this product, please comply with the following
safety precautions:
•
Verify that the input voltage printed on the power Adapter and the plug type matches
the local power supply.
•
Make sure that the power cord does not pose an obstacle or tripping hazard.
•
Disconnect the product from the power supply when cleaning.
•
Do not operate this product in hazardous or unstable environments.
•
Do not drop loads on the pan.
•
Use only approved accessories and peripherals, as available.
•
Operate the product only under ambient conditions specified in the Instruction Manual.
•
Service should be performed by authorized personnel only.
CONTROLS
Button
Primary
Function
(Short Press)
ON/ZERO
Turns the Indicator on
If on, sets zero.
Sends current value to COM
port if AUTOPRINT is Off.
FUNCTION
Initiates a mode.
Displays reference data.
TARE
Performs tare
operation.
LIBRARY
Display library data.
Secondary
Function
(Long Press)
Off
Turns the Indicator
off.
Units
Changes the weighing unit.
Mode
Change mode.
Press and hold: scroll
through modes.
Menu
Enter the User
menu.
Edit
Edit current library
record.
Menu
Function
(Short Press)
Yes
Accepts the current
menu or setting.
No
Advances to next item.
Rejects current setting;
advances to the next.
Increments the value.
Back
Moves back
to previous item.
Decrements the value.
Exit
Exits the User
menu.
Aborts a calibration
in progress.
Library
Function
(Short Press)
Yes
Accepts current
setting.
No
Advances to next.
Increments displayed value.
Back
Moves back to previous.
Decrements value.
Exit
Exits the library.
Stability symbol
Preset Tare, Tare,
Bruto, Gross,
Memory symbols
7-segment, 6-digit
LED display
Control Buttons
Capacity label
window
Net symbol
Center of Zero
Negative symbol
Kilogram, Gram,
Percent, Pound, Ounce,
Pound:Ounce, Tonne,
Pieces symbols
Battery charge
symbol
Scale symbol
Range symbol
Dynamic symbol
