EN-22
EXPLORER
BALANCES
4.2 Parts
Counting
Use this application to count samples of uniform weight. Three different modes can be selected:
Standard Counting
,
Check Counting
, or
Fill Counting.
4.2.1 Standard Parts Counting (default)
In the upper left portion of the home screen, select
Counting
.
The default (or last) Average Piece Weight (APW) is displayed.
Place objects on the pan to display the number of pieces.
The
PARTS COUNTING
-
Standard Home screen
Main Display Line
Second Display Line
Reference Fields
Application Buttons
Functions
Application Icon
The
Auto Optimization
feature improves counting accuracy:
it automatically re-calculates the piece weight as parts are
added. By default APW Optimization is
Off
.
When a new APW is established, APW Optimization occurs
when the number of pieces added to the pan is between one
and three times the number already on the pan. The screen
momentarily indicates
Auto Optimization
in the information
line.
4.2.1.1 Edit Settings:
To view or adjust the current settings, touch the
Edit Settings
button:
The Settings screen is now displayed.
Settings available:
APW, Sample Size,
Functions available:
Recalculate APW,
Return to Application
Establish an Average Piece Weight (APW)
Each time a new type of part is counted, the nominal weight of
one piece (Average Piece Weight or APW) must be established
using a small quantity of pieces. This APW is stored until
replaced by another APW.
There are two methods to establish the APW value:
1. The actual APW is known; or
2. The APW must be derived by weight. For this case the
current sample size will be used
To choose a different value, establish it beforehand, using the
Sample Size
button.
(See below.)
