EXPLORER BALANCES
EN-5
1. INTRODUCTION
1.1 Description
The Explorer balance is a precision weighing instrument that will provide you with years of service if properly cared
for. The Ohaus Explorer balances are available in capacities from 120 grams to 10,200 grams.
1.2 Features
Modular Design:
Ohaus Explorer balances are composed of two interconnected modules: a Terminal and a Base.
Depending on the user’s needs, the unit can be operated with the Terminal either attached to, or remote from, the
Base, with a single interconnect cord 1 meter long.
Touch Controls:
Quick, graphical access to all control
functions, over a dozen applications and many features.
Touchless Sensors
: can be assigned functions when
activated: Zero, Print, Tare, etc.
Statistics:
available in Weighing, Counting, Percent
Weighing, Check Weighing, Dynamic Weighing, Filling,
Density Determination, Pipette Adjustment and
Statistical Quality Control applications.
1.3 Safety
Precautions
Caution:
Read all safety warnings before installing, making connections, or servicing this
equipment. Failure to comply with these warnings could result in personal injury and/or
property damage. Retain all instructions for future reference.
•
Verify that the input voltage range printed on the data label and the plug type matches the local AC power
to be used.
•
Make sure that the power cord does not pose a potential obstacle or tripping hazard.
•
Use the balance only in dry locations.
•
Do not drop loads on the pan.
•
Use only approved accessories and peripherals.
•
Operate the equipment only under ambient conditions specified in these instructions.
•
Disconnect the equipment from the power supply when cleaning.
•
Do not operate the equipment in hazardous or unstable environments.
•
Service should only be performed by authorized personnel.
