EN-70
EXPLORER BALANCES
temperature value entered (internal lookup table).
Measure the actual water temperature using a precision
thermometer.
A numeric input window appears.
Enter the actual water temperature, then press
Done
.
The display returns to the previous screen with the new value
highlighted.
To return to the Density Determination home screen,
touch
Return to Application
.
To begin the Density Determination process,
press
Begin Density Determination
.
(See below.)
Step 1 of 2
–
Weigh the
Sample in Air.
Press
Begin
Density
Calculation
.
Follow screen
instructions,
then press
Accept
to store the dry
sample weight
(“in air”).
Step 2 of 2
–
Weigh the
Sample
Submerged in
the Liquid.
Follow the
screen
instructions,
then press
Accept
to store the
sample weight
(submerged
in liquid).
Once the necessary weights have been determined, the density of the sample is displayed in
g/cm
3
(along with the weight in air, weight in water) on the Application screen.
Press
Begin Density Determination
to reset all the weight values and restart the process.
