EN-14
RANGER
®
7000 SCALES
Clearing the Statistics / Accumulation results
To clear the statistic / accumulation results, press the button
.
A warning message appears. Press the button corresponding
to the icon
to confirm the deletion or press the button
corresponding to the icon
to abort the deletion and
return to previous screen.
4.1.3
Input/Output (I/O) Setup
The I/O’s can be customized for various user preferences.
The I/O’s are defined below (defaults in
Bold
).
Item
Available Settings
Discrete Input 1
Off,
Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input 2
Off,
Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output 1
Off,
Overload, Underload
Discrete Output 2
Off,
Overload, Underload
Discrete Output 3
Off,
Overload, Underload
Discrete Output 4
Off,
Overload, Underload
Note:
The I/O’s will only work when the I/O Option Board have been installed. See the Accessory list in section 9.4
for information.
The option I/O board provides two isolated inputs and four dry-contact normally open relay outputs which can be
used for simple process weighing.
Press the
button to enter the Main Menu.
With the button corresponding to the
icon, go down
the list and highlight
Application Mode
. Enter this sub-menu
by pressing the button corresponding to the
icon.
In the Application Mode menu enter the
Weighing
sub-menu.
