EN-24
RANGER
®
7000 SCALES
Notes:
To terminate the formulation process, press the
button corresponding to the
icon. If the added
weight is over the tolerance limit, compensation will be
performed according to the setup in the configuration (At
the end, Off, Immediately).
When the compensation is active (At the end or
Immediately), if the component added is within tolerance
the capacity bar is always in green color.
If one component added is outside the tolerance, the scale
will do compensation for next items. In this case, the value
displayed is not actual weight and the capacity bar will turn
red.
To finish the formulation, press the button corresponding to
the icon
and add the last component.
Then the formulation will finish and a Formulation Result
screen is displayed.
To print the formulation result press the button corresponding to the icon
or the button
.
To save the formulation result, press the button corresponding to the icon
.
To return to the main screen, press the button corresponding to the icon
.
4.4.2
Recipe Formulation
Make sure the formulation mode is set to recipe (see
section 4.4.4 for instructions).
The information line will now show ‘Please recall a recipe’
Recall a recipe from the Formulation Library by pressing
the button
. See section 4.10 for instructions on
how to create/recall a Library record.
Press the button corresponding to the
icon or
scan a barcode to start formulation.