EN-46
RANGER
®
7000 SCALES
5.5.5
Auto Zero Tracking
Set the automatic zero tracking functionality.
OFF
= disabled.
0.5 Division
= display maintains zero up to a drift of 0.5 graduation
per second
1 Division
= display maintains zero up to a drift of 1 graduation
per second.
3 Division
= display maintains zero up to a drift of 3 graduations
per second.
Note:
The setting is forced and locked to 0.5 Division when the Security Switch is set to
the locked position.
5.5.6
Brightness
Set the display brightness using the numerical keypad.
2
0…
80
…100
5.5.7
Auto Dim (minutes)
Set whether the display dims after x seconds/minutes.
OFF
= disabled.
1…30 (minutes)
5.5.8
Auto Sleep (minutes)
Set whether the display enters sleep mode after x seconds/minutes.
OFF
= disabled.
1…100 (minutes)
5.6
Application Mode
Enter this sub-menu to enable or disable the desired Scale Applications. Only one application can be
running at a time.
Note:
The use of each Application is described in detail in Section 4.
5.6.1
Turning an Application ON/OFF
Highlight the application by pressing the buttons
corresponding to the icons
and then press the button corresponding to the icon
to enter the selected submenu.
In the Item option screen, enter the
Enabled
menu
to turn it on or off.
Once an Application is enabled (turned on) it may be chosen by pressing the
Applications
button
until it’s icon appears in the upper left corner of the home screen.
The current menu item status is shown: OFF = disabled,
ON
= enabled
