RANGER
®
7000 SCALES
EN-7
2.5
Connecting the Interface
Use the built-in RS-232 port to connect either
to a
computer or a printer with a standard (straight-through) serial
cable.
Or connect using the scale’s USB port.
Interface connections on back of Terminal.
Thread terminal cable along cable coils on bottom of scale.
Or pass cable through groove near release button.
2.6
Leveling the scale
Only scales that have been leveled precisely horizontally provide accurate weighing results. The certified scales
have a spirit level to simplify alignment.
Turn the adjustable feet of the scale until the spirit level’s air bubble is inside the inner circle.
2.7
Remote Terminal Operation
The Terminal communicates with the weighing base via the Terminal cable. This cable must be plugged into the
Terminal for the Ranger 7000 to display properly. If desired, the Ranger 7000 scale may be operated either with the
Terminal attached, or remotely (up to 2 meters away).
RS232
USB host
USB slave
Used for options
Used for options
Connect to base
Cable groove
