Ranger™ Count 3000 Series EN-33
7.4 Printouts
The following sample print outs are generated by the
button, “P” Command or alternate
print command. The content of the printout is defined in the Print Content menu item. A
Description
Comment
PN: 123456789926
Part Number line
If Printx
Content
P/N is ON
363 PCS N
Result line
If Printx
Content
Result is ON
0.1420 kg G
Gross value line
If Printx
Content
Gross is ON and a tare value is entered
0.0420 kg N
Net value line
If Printx
Content
Net is ON and a tare value is entered
0.1000 kg PT
Tare value line
If Printx
Content
Tare is ON and a tare value is entered
APW: 0.11500 g
APW line
If Printx
Content
APW is ON
N: 3
Accumulation line
If Printx
Content
Accu is All
ACC: 956 Pcs
Accumulation line
If Printx
Content
Accu is All
7.5 Output Format
The printout string has a fixed length of 22 characters for most applications except check
weighing. For check weighing mode, the printout string has a fixed length of 29 characters.
Weight string print format:
Check Weighing application:
Field
Weight
(Right
aligned)
Space
Unit
(Right
aligned)
Space Stability
(?)
Space
T/N/G/PT
(Right aligned)
Space
Application
Status
(Right aligned)
Term.
Length
11
1
5
1
1
1
2
1
6
2
Non-Check Weighing application:
Field
Weight
(Right
aligned)
Space
Unit
(Right
aligned)
Space Stability
(?)
Space
T/N/G/PT
(Right aligned)
Term.
Length
11
1
5
1
1
1
2
2
Each field is followed by a single delimiting space (ASCII: 32).
Definitions:
Weight
- Up to 11 characters, right justified, - at immediate left of most significant
character (if negative).
Unit
- Up to 5 characters, right justified. If the Unit in the Print Content menu was set to
OFF, the unit will be removed in the weight string and replaced by spaces.
Stability
- “?” character is printed if not stable. If weight is stable a space is printed.
T/N/G/PT - “T” is printed for a tare weight, “N” printed if weight is net weight, ‘G’ or nothing
printed if weight is a gross weight, 'PT' is printed if the tare weight is Pre-set Tare.
Application Status (for Check) – Fixed to 6 characters. Display status like " Under", "Accept" and
"Over" for check weighing.
Terminating Character(s) - terminating character(s) printed depending on FEED menu setting.
