EN-2
Ranger™ 2000
Series
2.3 Selecting the Location
Use the scale on a firm, steady surface. Avoid locations with excessive air current,
vibrations, heat sources or rapid temperature changes. Allow sufficient space
around the scale.
2.4 Leveling the Equipment
The Ranger Series has a level indicator as a reminder that the scale should be
leveled for accurate weighing. There is a level bubble in a small round window on
the front of the scale.
To level the scale, adjust the feet so the bubble is centered in the circle.
Be sure the equipment is level each time its location is changed.
Figure 2-2. Level indicator
2.5 Connecting Power
AC power is used to power the scale when battery power is not needed. First,
connect the AC power cord (supplied) to the power input jack then connect the AC
plug to an electrical outlet.
Figure 2-3A. Connect the
power plug to the input jack
on the back of scale
.
Figure 2-3 B. Connect AC power
plug to the proper AC supply.
Level Indicator
Adjustable feet
