Ranger
™
4000 Count Series EN 15
ON
= enabled
Beeper Signal
[
Bp.sIG
]
Set how the beeper responds in Check Weighing mode.
OFF
= the beeper is disabled
ACCEPT = the beeper will sound when the weight is within the Accept range.
UNDER = the beeper will sound when the weight is below the Under setting.
OVER-
UNDER = the beeper will sound when the weight is above the Over setting.
OVER
= the beeper will sound when the weight is below the Under setting or above the
Over setting.
Beeper Key
[
BP.key
]
Set whether the beeper sounds when a button is pressed.
OFF
= no sound
ON
= sound
Accumulation
[
aCCUmM
]
Set the accumulation functionality.
OFF
= accumulation disabled
AUTO
= automatic accumulation
MAN
= manual accumulation
End Setup
[
End
]
Advance to the next menu or return to the top of the current menu.
4.4 Readout Menu
Enter this menu to set user preferences.
Reset
[
reset
]
Reset the Read menu to factory defaults.
NO
= not reset
YES
= reset
Stable Range
[
Stable
]
Set the amount the reading can vary while the stability symbol remains on.
0.5d
= 0.5 scale division
1d
= 1 scale division
2d
= 2 scale division
5d
= 5 scale division
Reset:
no
, yes
Stable Range:
0.5,
1
, 2, 5
Filter:
low,
medium
, high
Auto-Zero Tracking: off,
0.5
, 1, 3
Light:
off, on,
auto
Auto off:
off
, 1, 5, 10
End Readout:
Exit menu
