EN-2
RE Series
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the RE
Series scale. Please read the manual completely before installation and operation.
Safety Precautions
For safe and dependable operation of this scale, please comply with the
following safety precautions:
•
Verify that the input voltage printed on the AC Adapter and the plug type
matches the local AC power supply.
•
Make sure that the power cord does not pose an obstacle or tripping
hazard.
•
Disconnect the scale from the power supply when cleaning the scale.
•
Do not operate the scale in hazardous or unstable environments.
•
Do not drop loads on the platform.
•
Use only approved accessories and peripherals, as available.
•
Operate the scale only under ambient conditions specified in these
instructions.
•
Service should be performed by authorized personnel only.
2. INSTALLATION
2.1
Unpacking
Unpack and verify that the following components have been included:
•
Scale Unit
•
Weighing Pan
•
Power Adapter
•
Instruction Manual
•
Tower assembly (tower models only)
Save the packaging material. This packaging ensures the ideal protection for
the storage or transport of the product.
2.2
Assembling
For tower models only, install the tower display first by removing the
retaining screw at the bottom of the tower, and the bottom plate of the tower
bracket at the back of the scale. Route the connector through the tower
bracket before mounting the tower, plug the connector into the bottom socket,
affix the tower to the bracket, then re-install the bottom plate of the tower
bracket.
Summary of Contents for RE-C series
Page 2: ......
