127(
The tray on the Microplate Shaker is not designed to hold flask clamps.
(4) microplates
(2) microplates
(2) Micro-Tube Racks
The Microplate Shaker is designed to hold two (2) or four (4) microplates, or two (2) Micro-Tube Racks.
1. Place two (2) microplates or deep well blocks diagonally on the tray, or place four (4) microplates or deep well blocks on the tray. The plates/blocks do not have to be filled.
2. Place the corner of the plate/block under the spring located at each corner of the tray.
3. Slide plate/block into place. You are ready to use.
'එඏඑගඉඔ0එඋකඔඉගඍ6ඐඉඓඍක7කඉඡ&ඖඎඑඏඝකඉගඑඖඛ
2.
3.
4.
'එඏඑගඉඔ0එඋකඔඉගඍ6ඐඉඓඍක6ඍග8
8
EN
www.
GlobalTestSupply
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com