Traveler
™
Scales
EN-1
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the Traveler
Scales. Please read the manual completely before using the scale.
1.1 Safety Precautions
Please follow these safety precautions:
•
Verify that the Power Adapter input voltage matches the local power supply voltage.
•
Use the scale only in dry locations.
•
Do not operate the scale in hostile environments.
•
Do not drop loads on the pan.
•
Do not place the scale upside down on the pan.
•
Service should be performed only by authorized personnel.
1.2. Controls
Figure 1-1. Controls.
TABLE 1-1. CONTROL FUNCTIONS
Key Name
Function
•
Primary function (Short Press) – If scale is Off, turn On. If
scale is on, perform Zero/Tare function
•
Secondary function (Long Press) – Turn scale Off
On-Zero
Off
Yes
•
Menu function – (Yes) This key is used to accept the currently
displayed setting
•
Primary function (Short Press) – Send the current display
value to serial port if installed
Cal
•
Secondary function (Long Press) – Starts Span calibration as
available in Menu
