Traveler
™
Scales
EN-2
Key Name
Function
•
Primary function (Short Press)– Advances to next available
unit
Unit
No
•
Menu function – (No) This key is used to reject the displayed
setting and advance to next available setting
2. INSTALLATION
2.1 Package Contents
•
Scale
•
Pan
•
Draft Shield
•
Power Adapter
•
Calibration Weight (on some models, see Table 6.1)
•
Instruction Manual
•
Warranty Card
2.2. Location
Use the scale on a firm, steady surface. Avoid locations with excessive air currents,
vibrations, heat sources, or rapid temperature changes.
2.3. Transportation Lock, Calibration Lock & Pan Installation
Before using the scale the Transportation Lock must be released. At the bottom of the scale
slide the locking pin to the position. See Figures 2-1.
If the scale is to be calibrated by the user ensure that the Calibration Lock is set to
position. See Figure 2-2.
Install the metal pan over the plastic sub-platform.
Figure 2-1. Release Transportation Lock
Figure 2-2. Release Calibration Lock
