Traveler
™
Scales
EN-3
2.4 Connect Power
A Power Adapter is used to power the scale. Connect the Power Adapter to the power outlet
(see Figure 2-3) and the power plug to the back of the scale (see Figure 2-4)
Figures 2-3, Power Adapter
Figure 2-4, Power Plug
2.5 Battery Installation and Use
The scale may also be powered by batteries. Remove the battery cover and install four
alkaline AA (LR6) type batteries, (not included). Refer to Figure 2.5 to properly install the
batteries. Under battery power a battery symbol is shown on the left side of the display.
The Auto-Off setting is useful for conserving battery power, see section 4.2.1.
Figures 2-5, Battery Installation
For use only with UL or CSA Certified
(or equivalent approved) power
adapter, which is a Class 2 or a
Limited Power Source device.
