Valor™ 2000W Series
EN-9
4.4 Weigh Mode
1.
Press and hold
Mode
until [
wJeIGH
] (Weigh) is displayed.
2.
If required, place an empty container on the pan and press
Tare
.
3.
Add sample to the pan or container. The display shows the weight of the
sample.
4.5 Checkweigh Mode
This mode sets low and high weight limits for portion control processes.
1. Press and hold
Mode
until
[
CHeCk
]
(Check) is displayed.
[
CLr.ref
]
(clear
references) will then display.
Notes:
Press
Function
to view the low and high reference weight limits.
If there is no reference data stored,
[
Set.ref
]
is displayed. Press
Yes
to
set reference data.
2. Press
No
to use the stored reference weight limits and proceed to step 5.
3. Press
Yes
to establish new reference values. The scale will then display
[
Set.
LO
].
Press
Yes
to view the “Low” limit value. Press
Yes
to accept or
No
to edit
the “Low” limit value. The stored value then displays with the first digit
highlighted
[
0
00.000
kg
]. Repeatedly press
No
until the desired number
appears. Press
Yes
to accept and highlight the next digit. Repeat until all the
digits are correct. Press
Yes
to accept the “low” limit value,
[
Set. HI
]
will be
displayed.
4. Repeat the same procedure to accept or edit the “high” value.
5. If required, place an empty container on the pan and press
Tare
. Place
sample material on the pan or in the container. If the sample weight is under
the target weight range, the yellow LED will light. If the sample is within the
target weight range, the green LED will light. If the sample is over the target
weight range, the red LED will light.
6. To clear the stored reference values press and hold
Mode
until
[
CHeCk
] is
displayed. Press
Yes
when
[
Clr.ref
]
is displayed.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
sales@GlobalTestSupply.com
