Taptilo User Guide (2.0+ English)
© OHFA TECH INC.
10
2.2 Powering On/Off
To Power ON
Press the power button once until it is slightly pushed in. Wait a few seconds as
the LED lights start blinking.
With a sound effect, all the braille cells will move up. Follow the audio instructions
to continue.
To Power OFF
Press the power button once until it is slightly pushed out.
With a sound effect, all the braille cells will go down, and you will hear the audio,
“See you again later.” The LED lights will turn off one by one.
2.3 Choosing a Study Mode
Taptilo has two study modes: Self-Study Mode and Teaching Mode.
In Self-Study Mode, the device is used standalone using the built-in programs and audio
guidance. See
In Teaching Mode, the device is used with the app, and the user has access to the various
content and features available on the app. See