Taptilo User Guide (2.0+ English)
© OHFA TECH INC.
14
2.5.2 Connecting with the device
1.
Turn on Taptilo and wait until you hear the audio guidance.
2.
Open the app on your phone and make sure Bluetooth is turned on.
3.
Select the block image or “Tap to connect your device.” A connection pop
-up will
appear, or the app will automatically reconnect with the previous device if it is
within Bluetooth range.
4.
From the pop-up, select the serial number of your device (The serial number label
is located near the center of the bottom of the device). If the serial number does
not appear on the pop-
up, refresh list by selecting “search again.”
5.
Once the device is paired, you will hear “application connected” and you can start
using the app featr
2.5.3 Managing connection settings
From the app main menu, select the Options tab on the upper right corner, then select
Settings > Connect your device. You can connect or disconnect to your device here.
For more information, see