- ３ -
《
SET field
》
-This field displays a set count.
-The count in this field is decremented by one each time a screw is taken
out.
-When all screws of the preset count are taken out, this field displays the
set amount again.
-This field flashes while the set count is changed.
-This field flashes when you press the NO COUNT button when screw
feeding is in progress.
-The screw feeder stops when a screw remains on the stopper and runs
when no screw is on the stopper.
《
SET TOTAL field
》
-This field displays a total number of screw sets that have been taken out.
-The count in this field is incremented by one each time a set is complet
-
ed.
-The screw feeder stops when a screw remains on the stopper and runs
when no screw is on the stopper.
《ＬＥＤ
indicator
》
-This indicator lights up when screws of a present number (count) are all
taken out and goes off when the next screw is taken out.
-This indicator flashes when you press the NO COUNT button when screw
feeding is in progress.
-This indicator flashes while you change the volume of beeps.
《
Setting buttons
》
-These buttons are used to set, clear, and reset a count.
-The values of the LCD counter is backed up automatically by memory against a power failure or an unintentional operation of the power switch.
SET TOTAL field
SET field
ＬＥＤ
indicator
Setting buttons
Description of LCD Panel
Summary of Contents for NJ Series
Page 7: ... ６ ...
