The system includes an operating and display unit for local use. A remote PC
application can be used during commissioning and servicing.
To enable continuous operation, the WiseDrive system uses components designed
specifically for this system. The system supervises components related to safety
functions with continuous self-testing.
Burner control
LMV5 ver. 3
Burner controller is a microprocessor-based burner
control and safety system.
Burner control can have the following features:
● Burner control and safety functions
● Electronic fuel/air ratio
● Gas valve proving
● Capacity controller
● Fan frequency converter control (WD200)
● Residual oxygen control (WD200)
● Boiler cold start thermal shock protection
● Fuel flow meter (WD200)
● Burner efficiency measuring (WD200)
● Start-up and running time counters
● Fault and lockout history
● Real-time clock
● Bus interface
The burner controller is a safety device. Do not open the unit or interfere
with its operation.
Servomotors
SW00017 ver. 3
Servomotors are used to drive fuel regulators and
other actuating devices.
● Electrostatic discharge can cause damage to the servomotor.
● Do not dismount the servomotor.
● Do not modify the unit or any connected equipment or interfere with
its operation. This could damage the servomotor or change burner
settings.
● Never use a servomotor that you think might be damaged.
M4263 2206EN
75 (102)
