WARNING
DO NOT ATTEMPT TO START, ADJUST OR MAINTAIN THIS BURNER WITHOUT
PROPER TRAINING OR EXPERIENCE. FAILURE TO USE KNOWLEDGEABLE
TECHNICIANS CAN RESULT IN EQUIPMENT DAMAGE, PERSONAL INJURY OR
DEATH.
1.3 Product overview
Intended use
This is an automatic forced draught burner. The burner can be used on most heating
appliances; for warm and hot water boilers, steam boilers, hot air generators, and
various types of process heating. They are also designed to suit furnaces with high
back pressure.
As standard, the burners are mounted in horizontal orientation. The standard setup is
designed to operate in the altitude of max. 1,640 ft above sea level.
See
Other technical data and requirements
for the information on standard
applicable fuels. Burners using other fuels are available upon request.
Construction
The surface of the housing is finished with durable high-gloss paint. Electrical
installations and burner service are easy to perform because the top cover is
removable. The stainless steel alloy combustion head and the diffuser disc can
withstand high temperatures.
The motor output components of the fan motor (short-circuit protection, thermal
protection, contactor) must be designed according to the site.
The burner control system handles all burner operation sequences automatically. In the
event of a burner failure, the unit stops the burner automatically.
Each burner is tested separately before delivery to the customer.
This product is in accordance with
Our gas burners comply with standard UL295, oil burners with UL296, and dual-fuel
burners with both of the above-mentioned standards.
The manufacturing time is found in the type plate. The product's expected lifespan is at
least 15 years, if it and its components are used and maintained properly.
For more information on products, visit our website at
.
M4263 2206EN
7 (102)
