Min. oil inlet pressure to burner
2.5 bar or higher depending on oil
temperature at the pump. See illustration.
In-let oil temperature range: Heavy fuel oil
60 - 100 C°
Pump operating pressure (=atomizing
pressure) for heavy fuel oil
25 - 30 bar
Pump operating pressure (=atomizing
pressure) for light fuel oil
20 - 25 bar
.
Note! 1 bar = 100 kPa.
4.6.3
4.6.3
Adjusting the supply oil pressure
Adjusting the supply oil pressure
The diagram shows the required oil inlet pressure to the burner.
Check the inlet pressure to the burner from the the pressure gauge fitted to the filter
cover.
Recommended operating zone illustrated in gray
Temperature curve = Oil temperature at the pump
Example A :
Oil temperature at the pump
In-let oil pressure to burner
Status
102 C°
2,9 bar
OK
Example B :
Oil temperature at the pump
In-let oil pressure to burner
Status
120 C°
2,9 bar
LOW PRESSURE !
Pressure must be lifted over
3,8 bar
C)
50
100
150
1
2
3
4
5
6
P min.
P max.
T min.
T max.
A
B
RPMARINES 30820641GB
43 (77)
4. First start-up and adjusting
