3
© 2018 OJ Electronics A/S
AHC-3000-HMI-35T
LIST OF FIGURES
Fig. 1: Installation on flat surface
Fig. 2: Removing the front cover
Fig. 3: Removing the back cover
Fig. 4: Dimensioned drawing to facilitate installation in wall box
or panel front
Fig. 5: Connecting Modbus via the RS485 Modbus port
Fig. 6: Connecting Modbus via the screw terminals
Fig. 7: Modbus cable connection
INTRODUCTION
AHC-3000-HMI-35T is a touchscreen panel with a user-friendly
graphical user interface specially developed for controlling
ventilation systems. The panel communicates with the AHC-3000
controller via Modbus interface, ensuring easy installation.
GENERAL SETTINGS
This quick start guide only
describes basic settings. If the
screen saver is active, simply
touch the screen once to open
the home screen.
This screen provides access to
elementary functions such as fan
speed, temperature and set-up.
The time and alarm are shown at
the top of the screen. The alarm
bell is visible if an alarm has been
activated and can be classified
either A or B. The house at the
top left of the screen provides
access to a simple overview of
temperatures, air volumes and
filter pressures. The number under the house indicates the number
of the unit. The temperature shown to the right of the house is the
English
Summary of Contents for AHC-3000-HMI-35T
Page 67: ...2018 OJ Electronics A S 67...
