PAGE 28
© 2018 OJ Electronics A/S
6.1. General Operation
The controller has two push buttons (or magnetic sensors) for easy operation and
LED lights indicate the state of the system
6 Daily Use
No.
ICON
FUNCTION
LED
DESCRIPTION
A
~
POWER ON
Green
Power supply connected
No supply voltage
B
SYSTEM ON
Green
System active: Automatic detection and
control working
Standby: System will only heat if Forced
Heat is activated
C
LOW TEMP
Green
Load will heat if moisture is detected
Too warm for automatic load activation
(5 °C)
D
HEATING
Green
Melting active
No load on heating
Forced Heat active
E
ERROR
RED
Error detected
Test mode active
F
SYSTEM ON
Push button to start automatic control
Temperature and snow & ice detection sensors are active
Hold button for 3 sec to stop system
G
Forced Heat
Push button to start Forced Heat
Hold button for 3 sec to stop Forced Heat
>
<
Contents
