OJ Electronics WLM2-1BA, User Manual

20

Daily use of the room sensor

4-Event Clock Mode

The day has been split into 4 events describing a typical day. When the room sensor is in 

this 4-event mode it will change the temperature to the required level automatically at the 

programmed times. As standard the room controller has days 1 to 5 (Monday to Friday) 

with 4 events and days 6 and 7 (Saturday and Sunday) with 2 events. Each events allows 

you to increase or decrease the set temperature. For programming see page 17. 

Please, see page 18 - PRO - 4-event sequence to alter the daily event sequence.

Sleep

Return

Leave 
home

Wake up

type W

lC

t

2

 (and W

lC

t

2/

r

/HW/2)

4-event clock mode/

automatic mode:

In automatic mode, the clock function symbol (     ) and one of the 4-event symbols (                         ) will be 

indicated. Programming page 17.

Comfort mode:

5 secs.

temporary override

To temporarily override any temperature in the 4-event schedule program, press the UP (

△

) button once, to show 

the temperature in the display, and press UP (

△

) or DOWN (

▽

) again to increase or decrease the temperature. The 

display will flash for 5 seconds, and will then revert to the time. The override will operate until the next programmed 

event when the thermostat will resume the automatic programme.

Cancel comfort mode (temporary override)

To cancel the temporary override, press the Ok (    ) button twice.

Manual mode:

Permanent override:

During holidays, the scheduled 4-event program can be overridden. Press the Ok (    ) button, and then the UP (

△

) or 

DOWN (

▽

) button until the override temperature is set. The set temperature will remain in the display and the unit will 

now operate to this temperature permanently.

Cancel manual mode

To cancel the permanent override state press the Ok (    ) button once, and the unit will resume automatic function.