Press OK (
) button for 3 secs. to begin programming
: Time and temperature
: Time and temperature
: Time and temperature
: Time and temperature
Day 1 - 5
Day 6 - 7
: Time and temperature
: Time and temperature
p. 37
Programming 4-Event Clock Time and Temperature
For each event, the start time and required temperature needs
to be set.
For example, in the morning you wish the heating to start at
07:00 and the temperature to rise to 25˚C. Press OK (
✓
) button
for 3 seconds and the start time is displayed. Change this to
07:00 with the UP (
▲
) or DOWN (
▼
) button. Press OK (
✓
) to
confirm.
The temperature is now displayed. Change this to 25˚C with the
UP (
▲
) or DOWN (
▼
) button. Press OK (
✓
) button to confirm.
This action can now be repeated for the second, third and
fourth event.
These settings will be valid for days 1-5 showing on the display.
To program the days 6 and 7, repeat the above. Days 6 and 7
are usually Saturday and Sunday, and only have two events
(generally morning ON and evening OFF).
The temperature can be set within the range of +5 to +35˚C.
It is also possible to select the heating OFF at that event by
reducing the setting to 5˚C, and then pressing the (
▼
) once
more.
Note that when programming the “Sleep” time (event 4),
please ensure that this time is before midnight (00:00).
T
ype WLCT
