background image

                                     

••••  www.ojedausa.com  •  info@ojedausa.com  •  Pg. 8  ••••

    

Part Number 100330051

 

PRESCRIPTIONS, 

PROHIBITIONS 

AND 

OTHER 

USES 

FOR 

THE 

EQUIPMENT 

 

 

The  equipment  has  been  exclusively  designed  to  maintain  the  proper 
temperature  of  packaged  fresh  food  and  beverages.    Because  the  unit  is 
not  designed  to  cool  the  product  down  quickly,  the  product  must  be 
loaded at its appropriate temperature

  

Displaying pharmaceutical products in this unit is prohibited. 
 

CAUTION 

 
-  Do not remove grilles or panels that require using tools to be accessed

 

- Do not keep the unit running unloaded. UNPLUG IT when you are not 
planning to use it. 

 

 
Using any electrical or electronic equipment entails the compliance with some fundamental rules. 
-  Do not touch the unit with wet hands or feet.

 

-  Do not install the equipment outdoors. 

 

-  Do not remove or ignore safety devices. 

 

-  Do not leave objects on top of the unit. 

 

-  Do not climb on top of the unit. 
-  Never use direct or indirect water jets on the unit 

 

-  Do  not  allow  the  electronic  control  to  be  adjusted  by  customers  or 
unqualified  personnel.  For  any  adjustment  you  must  contact  your 
distributor. 

 

-  Verify  that  the  hot  air  stream  from  the  condenser  towards  the  back  of 
the  unit  is  not  directed  to  other  refrigeration  units,  which  would 
compromise their operation. 

 

- Under no circumstance should you block the front grille of the unit.

 

 

 THE MANUFACTURER DOES NOT ASSUME ANY RESPONSIBILITY ARISING FROM 
DAMAGES CAUSED BY IMPROPER, INCORRECT, OR ERRONEOUS USE.

 

 

It is important to instruct the user on the operation of the equipment according to this instruction manual, 
and to make sure that said manual is within reach of any operator that might use the unit. 

 

SHELF SPECIFICATIONS 

 

The shelves have been designed to withstand the rigors of normal use and loading capacity not to exceed 
40 pounds per square foot evenly distributed weight per shelf:

 

This load limits must not be exceeded to prevent potential damage to the shelf and/or injury to users.

 

Summary of Contents for RVP10SL











Reviews: