2. Add Fingerprint
1.
Press the “#” key three times, input the administrator
fingerprint or password to enter into the main menu,
follow the voice prompt
“press 1, add fingerprint sub
menu”,
and then
“press 1, add administrator; press 2, add
ordinary user”.
Number the fingerprints or directly press
the “#” key following the voice prompt.
The system will automatically match the number. Input
fingerprints according to voice prompts. Note: press more
than five times after the voice prompt
“please press one
more time”
, the fingerprint system will inform the user of
successful enrollment. Otherwise, the system will require
“please press again”.
Please press the “*” key to return,
and re-input again following the steps above.
2.
The system can store a maximum of 100 fingerprints,
which are divided into the administrator fingerprint and
ordinary user fingerprint.
3.
In order to ensure proper registration and recognition,
please place the finger flat on the fingerprint collector
while enrolling and avoid using fingertip and finger side.