COIN AND CARD LOCKS MANUAL_OJMAR CARD OR CARD/COIN LOCKS
15
2.2.3 Remove key
The remove key is used to extract a lock cylinder from a lock.
If a user key is lost, the lock cylinder should be removed immediately as a security measure. Never use a copy of the key if it is lost.
Standard remove key (Model 75).
The digits H3 in the key number indicate that it is a remove key.
Drilled remove key (Model 76).
The digits 3 Q3 indicate that it is a remove key.
MODEL 75
MODEL 76
STEPS TO FOLLOW FOR THE CORRECT USE OF THE REMOVE KEY.
1.
Insert the remove key.
2.
Turn the key.
3.
Extract the lock cylinder and remove it.
4.
Insert the new lock cylinder with a user key.
