WHAT TO DO IF A CODE IS FORGOTTEN
OR LOST.
The 8001 code combination lock can be opened with the
override Master key at anytime if the previously entered code
is forgotten, lost or in an emergency.
Using the Master Key to open the lock it will then also be able
to discover the code used previously.
Note: It is important and advisable that the Master Key is kept
securely and issued and controlled by management only.
1. OPEN DOOR WITH MASTER
KEY.
To open the door using the Master Key, insert into lock cylinder and turn
90º right for right hand doors and 90º left for left hand doors. The door will
now open.
With the door now open, turn the Master key 90º to the locked position
and remove.
2. CODE RECOVERY.
With the door now open and access to the rear of the lock the
combination code stored in the lock can be recovered as follows:
Firmly press and hold the code recovery lever on the inside of the lock.
See diagram bellow:
Whilst maintaining pressure on the lever, turn each code wheel from left to
right until it stops or a click is heard.
See diagram below:
3. CONFIRMING RECOVERED
CODE.
Where the wheels stop will indicate the code stored in the lock and you
should now be able to open and close the lock freely.
If the lock does not open and close freely, repeat step 2. Code recovery.
Lock rear view
Code recovery lever
Mode set screw
Lock front view
Code wheels
Open position
Knob turn
Close
position RH
Close
position LH
