NEXO NLX1_LOCK INSTALLATION AND ASSEMBLY OJMAR
8
2 PROCEDURE TO UNMOUNT THE LOCK
The steps to follow to disassemble a NEXO NL1 lock on a support or furnishing should be followed in this order:
1.
Loosen the two screws on the
battery holder using the key
provided by Ojmar.
2.
Remove the battery holder.
3.
Remove the cover. To do this,
with the flat side of the key
supplied by Ojmar, push the clip
of the cover upwards that is on
the gap on the battery holder.
This clip is located in the central
part of the lock.
Lower part
2
1
