6_API INTRODUCTION
6.5.3.1
Maintenance via RFID cards
•
Describe card: Translates a frame with information read from a card to Human
readable information.
•
Frame for master card: Creates a frame for a card that can open every lock of
the facility and erases the lock occupancy if it closed, so that another user can
close that lock afterwards.
•
Frame for service card: Create a frame for a card that can close and open a
lock without deleting any of its memory, so if the lock was occupied, after using
the service card the lock is still occupied.
•
Frame for cancellation card: Creates a frame where one card can be cancelled
and sent to the lock´s black list. Used only for the OTS family. If the user card is
configured to work with black list is available for NLX1 family.
•
Frame for test card: A card that can close and open any non-configured lock.
This card is very useful for the mounters, so they can check that mechanical
part of the lock fits with the locker. Available for the OTS family.
•
Frame for reset card: Send a configured lock to default status (to non-
configured lock).
•
Frame for subgroup master card: If more than one subgroup is used and
different level of maintenances wants to be establish, these card works like a
service card but only for the allowed subgroups. Available for the OTS family
•
Frame for events card: Creates a frame that can recover the last 3 events of the
lock, telling who has made the action, which is the action made to the lock and
when has happened that action. Available for the OTS family.
6.5.3.2
Maintenance via NFC programmer
•
Write lock set up data: This action can be used over a configured lock in order
to update the black list. Available for the OTS family.
•
Get events from NFC programmer: Can recover at the same time the last 32
events of 100 locks, telling which action has been made, who has made the
action and when has happened. Available for the OTS family
6.5.3.3
Maintenance Via Network
•
All the maintenance frames to be recorded in cards depicted in previous
paragraphs are also available to be sent to the lock in online mode. Plus: Set
Time, Get Events and battery, Set White Black list for offline mode.
Summary of Contents for Nexo NLX1
