Battery Replacement,
Emergency Power
①
Need to replace the battery with new one when battery replacement LED is
blinking.
②
Replacing the battery does not change all existing settings and codes.
※
Please make sure the battery cover is plugged in completely.
Open Battery Cover
Battery Replacement
1
Use 5 pin mini-USB at the bottom of the front
Emergency Power
2
①
Connect 5V mini-USB into the emergency power supply port.
②
Open the lock with User Code or Master Code.
③
Replace the battery with new one.
※
Emergency power supply can be used when the battery is completely
exhausted, and the lock is not working.
※
User code is deleted when the Master code is used.
• In Public mode, the lock will stay unlocked.
• In Private mode, the User code is deleted. Need to register a new User
code.
Wrong User code or Master code 5 times : The lock will be freeze up for 30 seconds. Possible to try again after 30
seconds.
Forget the User code : Use Master code to open the door
Cannot lock the door : There is a warning alarm if the door is droop or clothes get stuck on the door. Fix the door
or remove the cloth away from the door
Fault Diagnosis & First Aid
Plug in the battery cover until it clicks
11
