OK-I PTZ-KB050, Operational Manual

- 5 -

12. Auxiliary Control of the Camera

㧦

By combination of 

[MENU]

and

 [ON], [OFF] 

buttons, you can set 

some data of the camera, and functions are listed as follows (operations of COP-2 Protocol):

Definition of Keyboard Operation 

No. of 

Value N 

Control Object 

[MENU]+N+[ON] [MENU]+N+[OFF]

0 

Camera power supply/reset control 

Power ON/OFF 

Switching 

(Invalid in COP-1) 

Recover Initial 

Values of Camera 

1 

Back Light Compensation 

ON

OFF

2

Zero Illumination (refer to function of 

camera) 

ON OFF 

3

Menu/Display (refer to function of 

camera) 

ON OFF 

4 Digital 

Zoom 

ON

OFF

5 Reserved 

6 

Focus (Invalid in COP-1) 

Automatic 

Manual

7 Iris 

Automatic 

Manual 

c

i

t

a

m

o

t

u

A

8

Manual

9

Indoor Mode 

Outdoor Mode 

10

White Balance Mode

㧔

WB

㧕

ATW Mode 

One Push WB 

11 

Black & White/Color Switching 

(Invalid in COP-1) 

Color Black 

& White 

12

< 180°, low speed 

> 180°, low speed 

(Invalid in COP-1) 

13

< 180°, middle speed

> 180°, middle speed

(Invalid in COP-1) 

14

Set Auto Pan (Only conditions for scan. 

If start scan, operate as Item 6 in this 

paragraph)

< 180°, high speed 

> 180°, high speed 

(Invalid in COP-1) 

For different camera, control functions in the list could be different. 
For the camera with the menu, switch ON/OFF the menu by “

[MENU]+[3]+[ON]”

, and switch

ON/OFF the OSD by 

“[MENU]+[3]+[OFF]”.

In case the camera has the menu and the menu is ON

㧦

1.

Select the item on the menu by buttons

 [WIDE]/[TELE]

 to scroll the cursor up or down; 

2.

Chang the status of the selected item on the menu by buttons 

[FAR]/[NEAR]

;

3.

Switch OFF the menu as per operations in the list after the menu is set. 

Take care of differences between the 

Menu of Speed Dome

 and the 

Menu of Camera

. For the speed 

dome with the menu, enter the menu by 

“[64] +[CALL]” 

and basic operations are as follows

㧦

1.

Call No.64 preset point to open the main menu by the control keyboard. 

2.

When the menu appears on the screen, move the cursor to the item you need to set by 

“TILT 

UP”

and

 “TILT DOWN”, 

and enter the settings of the item to make change by “

PAN LEFT” 

and

 “PAN RIGHT”

;

3.

Speed up operation of the joystick after keeping it for one second in one direction. 

4.

All settings of the menu could not be lost even power failure occurred; 

5.

Operations under special case can be referred on the description of the menu of the ball machine.