16
EN
PROGRAM
9
Up to 20 tracks can be programmed in a desired sequence.
In stop mode, press the PROG button.
00
flashes.
10
Select the desired track with the
/
buttons. Confirm selected track by pressing the PROG
button again.
00
flashes. Select additional tracks with the
/
buttons and confirm with
PROG.
11
Start program:
Press
.
MICROPHONE
12
Switching on: Rotate the MUSIC VOL control in a clockwise direction. The POWER indicator lights
up.
13
Switching on microphone(s): Set the switch to the ON position.
14
Adjusting microphone volume: Rotate the MIC VOL control to the desired volume.
15
Pull one or both of the microphones from their holders and start speaking/singing.
Notes:
• Do not hold the microphone too close to your mouth to achieve a clear sound.
• Pointing the microphone towards the appliance or towards each other will lead to sound
distortions.
16
Switching off microphone(s): Set the switch to the OFF position.
SING-ALONG FUNCTION
17
Switching on: Rotate the MUSIC VOL control in a clockwise direction. The POWER indicator lights
up.
18
Open CD compartment door: Press the OPEN Button. Insert a CD with label facing towards you.
Close the CD compartment door.
19
Start playback:
Press
.
20
Switching on microphone(s): Set the switch to the ON position.
21
Adjusting microphone volume: Rotate the MIC VOL control to the desired volume. Pull one or
both of the microphones from their holders and start speaking/singing to the music of the CD.
22
Stop playback:
Press
STOP
.
23
Switching off microphone(s): Set the switch to the OFF position.
CONNECTING HEADPHONES
23
Connect headphones with a 3.5 mm plug to the PHONE socket. The loudspeakers are muted
whilst the headphones are connected to the appliance.
IM_OPC200CD_140721_V05.indb 16
21/7/14 10:02 AM
