28
EN
SETUP MENU SETTING
Press SETUP button to get the setup menu. Use direction
buttons to select the preferred item and
confirm selection by pressing ENTER. After finishing settings, press SETUP again to normal display.
The following menu items can be changed:
GENERAL
: selects the GENERAL PAGE menu.
AUDIO
: selects the AUDIO PAGE menu.
VIDEO
: selects the VIDEO PAGE menu.
PREFERENCE : selects the PREFERENCE PAGE menu.
PASSWORD
: selects the PASSWORD PAGE menu.
GENERAL SETUP PAGE
15
TV DISPLAY: selects the aspect ratio of the playback picture.
4:3 PANSCAN: if you have a normal TV and want both sides of the picture to be trimmed or
formatted to fit your TV screen.
4:3 LETTERBOX: if you have a normal TV. In this case, a wide picture with black bands on the upper
and lower portions of the TV screen will be displayed.
16:9: wide screen display.
WIDE SQUEEZE: Set screen mode to 4:3.
ANGLE MARK
Displays current angle setting information on the right hand corner of the TFT screen if available on
the disc.
OSD LANGUAGE
You can select your own preferred language settings.
CLOSED CAPTIONS
Closed captions are data that are hidden in the video signal of some discs. Before you select this
function,please ensure that the disc contains closed captions information and your TV set also has
this function.
SCREEN SAVER
This function is used to turn the screen saver On or Off
AUTO STANDBY
This function is used to select auto standby settings after 3 or 4 hours.
3 HOURS: the unit will turn to standby mode after 3 hours if there is no interaction from user within
this period of time.
4 HOURS: the unit will turn to standby mode after 4 hours if there is no interaction from user within
this period of time.
OFF: the auto standby function is disabled, and unit will stay in “on” mode even if no interaction
from user.
IM_OPD910_161214_V03_HR.indb 28
14/12/16 5:46 PM
