05
•
To pause playback, press the PLAY/PAUSE button (29) on the remote control or the INPUT/OK/PLAY/PAUSE button
(11) on the projector. Press the button again to continue playback.
•
To open the previous file, press the PREVIOUS button (27) on the remote control.
•
To open the next file, press the NEXT button (31) on the remote control.
•
To open the playback menu, press the OK button (26) on the remote control or the UP arrow button (6) on the
projector. Select a playback action and press the OK button (26) on the remote control or the UP arrow button (6) on
the projector to confirm. The available playback actions vary by media type.
6.5 The settings menu
To open the settings menu, press the MENU button (8)(24). You can navigate between Picture, Sound, Time and
Options with the LEFT (10)(25) and RIGHT (7)(33) arrow buttons.
Select a menu item with the UP (6)(32) and DOWN (9)(34) arrow buttons. To open a menu item, press the OK button (26)
on the remote control or the INPUT/OK/PLAY/PAUSE button (11) on the projector.
To go a step back, press the MENU button (8)(24). To close the settings menu immediately, press the BACK button (23)
on the remote control.
Picture
Picture mode
Select the desired picture mode (Standard, Mild, Dynamic, Personal) with the LEFT (10)(25) and RIGHT (7)(33) arrow
buttons. Select Personal picture mode to manually set values for contrast, brightness, colour and sharpness. Use the
arrow buttons to do this.
Colour temperature
Select the desired colour temperature (Normal, Warm, Personal, Cold) with the LEFT (10)(25) and RIGHT (7)(33) arrow
buttons. Select Personal colour temperature to manually set values for red, green and blue. Use the arrow buttons to do
this.
Aspect ratio
Select the desired aspect ratio (16:9, 4:3) with the UP (6)(32) and DOWN (9)(34) arrow buttons.
Noise reduction
Select the desired noise reduction (Off, Low, Middle, High) with the UP (6)(32) and DOWN (9)(34) arrow buttons.
Projection direction
Select this menu item and press the OK button (26) or the INPUT/OK/PLAY/PAUSE button (11) to change the orientation
of the projected picture. Switch between projection direction settings (Front, Rear, Ceiling, Ceiling Rear) with the OK
button (26) or INPUT/OK/PLAY/PAUSE button (11).
Reduce display size
You can shrink the projected picture to 75% during playback. Select the desired value with the LEFT (10)(25) and
RIGHT (7)(33) arrow buttons.
HDMI mode
Select PC if you are connecting a PC or laptop. Select VIDEO if you are connecting an audio/video device (e.g. a DVD
player).
Sound
Sound mode
Select the desired sound mode (Standard, Music, Movie, Sports, Personal) with the LEFT (10)(25) and RIGHT (7)(33)
arrow buttons. Select Personal sound mode to manually set values for treble and bass. Use the arrow buttons to do
this.
Surround sound
Press the OK button (26) or INPUT/OK/PLAY/PAUSE button (11) to switch surround sound ON or OFF.
Equalizer
Select the desired value (0 - 100) for each frequency band (120 Hz, 500 Hz, 1.5 kHz, 5 kHz, 10 kHz) with the UP (6)(32)
and DOWN (9)(34) arrow buttons.
5.5 Placing the batteries in the remote control
1
Improper installation of batteries can result in leaks and corrosion to the battery and damage to the device.
Corrosion, oxidation, battery leaks and other gradual defects will invalidate the warranty.
4
Remove the battery cover.
5
Insert the AAA batteries matching the (+) and (-) polarity markings.
6
Re-install the battery cover.
5.6 Charging a mobile device
Use a USB cable to charge a mobile device via the USB 5 V output (15) on the projector.
6. OPERATION
Switch the projector on with the ON/OFF button (5)(28).
6.1 The main menu
The main menu has four folders: Movie, Music, Photo and Text. The current input source is indicated at the top left. The
folders can be navigated as follows:
•
To select a folder, use the arrow buttons on the remote control or the LEFT (10) and RIGHT (7) arrow buttons on the
projector.
•
To open the folder, press the OK button (26) on the remote control or the UP arrow button (6) on the projector.
•
Or, to go back a step, press the BACK button (23) on the remote control or the DOWN arrow button (9) on the
projector.
6.2 Selecting an input source
•
Go to the main menu.
•
Press the INPUT button (35) on the remote control or the INPUT/OK/PLAY/PAUSE button (11) on the projector.
•
Select the desired input source (AV, VGA, HDMI, USB, SD) with the UP (6) (32) and DOWN (9)(34) arrow buttons.
•
Confirm with the OK button (26) on the remote control or the RIGHT arrow button (7) on the projector.
5
NO SIGNAL will appear at the top left if no input source could be found. Check the input source and cables.
6.3 Opening or playing a multimedia file
•
Insert a USB storage device or Micro SD card containing the multimedia file into the appropriate input (17)(16).
•
Go to the main menu.
•
Check at the top left of the screen to verify that the correct input source has been selected. If not, select the correct
input source (USB or SD).
•
Choose from Movie, Music, Photo or Text.
•
Select the folder containing the multimedia file and press the OK button (26) on the remote control or the UP arrow
button (6) on the projector.
•
Select the multimedia file. A preview and properties of the selected file will appear after a few seconds.
•
To play the file, press the PLAY/PAUSE button (29) on the remote control or the INPUT/OK/PLAY/PAUSE button (11)
on the projector.
•
If you have played this file previously, you will be asked "Memory Play: Yes/No?". To continue playback from where
you paused it, select Yes and press the OK button (26) on the remote control or the UP arrow button (6) on the
projector. To start playback from the beginning, select No and press the OK button (26) on the remote control or the
UP arrow button (6) on the projector.
6.4 During playback
•
To mute the sound, press the MUTE button (30) on the remote control. Press the button again to unmute the sound.
•
To lower the volume, press the VOLUME DOWN button (22) on the remote control or the LEFT button (25) (10) on
the projector.
•
To increase the volume, press the VOLUME UP button (36) on the remote control or the RIGHT button (33) (7) on the
projector.
