16
EN
STEAM IRONING AND STEAM BOOST FUNCTION
Steam ironing and steam boost can only be used at temperatures between
and max. This
temperature range is shown on the temperature control.
Fig.
8
Put the water-filled iron onto its standing base.
Fig.
9
Connect the power plug to a suitable power outlet. The operation/standby control lamp lights
green.
Fig.
10
Set the desired temperature on the temperature control dial by turning it to the ironing
setting.
Fig.
11
The temperature control lights on as long as the iron is heating up. It switches off as soon as
the set temperature has been reached.
Fig.
12
You can set the desired steam 1 or 2 amount on the steam control or you can shut the steam
off (0) entirely for dry ironing.
Fig.
13
Press the knob to generate a steam boost.
DRY IRONING
For dry ironing set the steam control knob to 0. The tank can be empty for dry ironing. Once water is in
the tank, the steam boost can also be used at higher temperatures for dry ironing.
Caution:
• Never directly point the steam boost into the direction of people or animals!
• Always iron on a heat-resistant surface only.
AFTER USE
Fig.
14
Unplug the power plug from the power outlet. Put the iron back onto its stand base. Let the
product cool down.
Fig.
15
Automatic Switch-off
This product switches automatically into standby mode, if it has not been used for a certain
period of time. Once the product is moved again, it switches itself on again.
• Horizontal position
If the product is sitting on its soleplate and is not moved for 30 seconds, it switches to standby
automatically.
• Vertical position
This product switches off after approx. 8 minutes, if it is on its stand base and is not in used.
Note: The operation/standby control lamp starts to flash.
CLEANING AND CARE
• Put the steam control on the 0 Position.
• Unplug from the power outlet and let the product cool down.
• Rinse off the calcium particles and other deposits from the soleplate with a damp cloth and some
detergent.
• Clean the upper part of the iron with a damp cloth.
• Rinse out the water tank regularly with clear water and then empty it.
• Keep the product upright in a safe and dry place.
Note: In order to keep the soleplate smooth, it should not come into contact with metal objects.
Caution: Do not use any abrasive sponges, vinegar or other chemicals in order to clean the soleplate.
IM_OSI3211_161206_V02_HR.indb 16
9/12/16 8:50 AM
