BEFORE OPERATION
ASSEMBLY
Place the mat on top of the platter.
Remove the tie securing the tonearm.
Remove the stylus guard.
CONNECTIONS
1
3
2
Before connecting the unit it is advised that you also
consult your current equipment instruction manual.
Note:
Be sure to turn off the equipment before you make
changes to the different connections.
1. Connect the power cord to an AC outlet.
2. Connect the RCA cable to the PHONO input of your
AMPLIFIER.
Output terminals Amplifier(Receiver)
L (White)
L Channel
R (Red)
R Channel
NOTE: You can also use a line input by setting the phono
/
line switch at the rear of the turntable to line.
3. Connect PC via USB cord.
PC
Set the PHONO/LINE
switch to “LINE”.
Set the PHONO/LINE
switch to “PHONO”.
36
Summary of Contents for OTT2040
