GB-1
Translation of the original Operating Instructions
CONTENT
Page
Illustrations
1 - 3
Pictogram illustration and explanation
4 - 7
Technical data
GB-1
Safety instructions
GB-2
General safety information for power tools
GB-2
Intended use
GB-4
Before use
GB-5
Instructions foruse of the equipment
GB-5
Switching on and off
GB-5
Adjusting the turning handle
GB-5
Maintenance
GB-5
Holding the hedge trimmer when in use
GB-5
Optimum safety
GB-6
Storing the trimmer after use
GB-6
Repair service
GB-6
Spare parts
GB-6
Waste disposal and environmental protection
GB-6
Warranty
GB-6
Declaration of Conformity
GB-7
Service
GB
| Operating Instructions
Electric Hedge Trimmer
Technical data
HS 6521
Operating Voltage
V~
230-240
Nominal Frequency
Hz
50
Nominal Consumption
W
650
No-load Speed n
0
min
-1
1500
Cutting length
mm
550
Cutting capacity
mm
22
Weight (without flex)
kg
3,2
Noise Pressure Level L
pA
dB (A)
90,5 K= 2,5 dB (A)
Sound power level L
WA
dB (A)
99
Vibration according to EN 60745
m/s
2
4,4 K= 1,5 m/s
2
Class of protection: II / DIN EN 60745/VDE 0740
Emissions
-
The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
-
The specified vibration emission value can also be necessary for the assessment of work breaks are used.
-
The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
The noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention:
Noise protection! Please observe the local regulations when operating your device.
Interference suppressed in accordance with EN 55014, EN 61000-3-2, EN 61000-3-3.
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of EN 60745-1and EN 60745-2-15 and fully comply with
the provisions of the German Product Safety Act.
Summary of Contents for HS 6521
Page 3: ...A B 3 2 3 4 5 C...
Page 4: ...7 8 4 9 8 mm 6...
