background image

Déclaration de Conformité pour la CE

conforme à la directive CE sur les machines 98/37/EG

Nous,

  ikra GmbH, Schlesier Straße 36, D-64839 Münster / Altheim

, déclarons sous notre seule responsabilité 

que les taille-haie 

HSD 700 Profi  (HS 6707 Okay)i

, faisant l’objet de la déclaration sont conformes aux prescrip-

tions fondamentales en matière de sécurité et de santé stipulées dans les Directives de la CEE 

89/336/CEE 

(di-

rective EMV)

 et 73/23/CEE

 (directive de basse tension), 

98/37/EG 

(directive CE sur les machines) et

 2000/14/C.E.

 

(directives en matière de bruit). Pour mettre en pratique dans les règles de l’art les prescriptions en matière de 

sécurité et de santé stipulées dans les Directives de la CEE, il a été tenu compte des normes et/ou des spécifi -

cations techniques suivantes:

 EN 55014-1, EN 55014-2, EN 50144-1, EN 50144-2-15, EN 61000-3-2:1995, EN 

61000-3-3: 1995, EN 774, EN 50366

.

Niveau sonore mesuré     

94,2 dB (A)  

Niveau sonore garanti      

97,0 dB (A

Procédure d’évaluation de conformité voir annexe V / directive 2000/14/CE

FR

Münster,  03.11.2006 

  

                                                              Gerhard Knorr, Direction technique Ikra GmbH

                                                         Représentant pour la conformité CE, Mogatec GmbH

La documentation technique est conservée par : Gerhard Knorr, Kärcherstraße  57, DE-64839 Münster

EG-Konformitätserklärung

entsprechend der EG-Maschinenrichtlinie 98/37/EG

Wir,

 ikra GmbH, Schlesier Straße 36, D-64839 Münster / Altheim

, erklären in alleiniger Verantwortung, dass 

die  Heckenschere 

HSD  700  Profi   (HS  6707  Okay),

  auf  die  sich  diese  Erklärung  bezieht,  den  einschlägigen 

Sicherheits- und Gesundheitsanforderungen der EG-Richtlinien 

89/336/EWG

 (EMV-Richtlinie), 

73/23/EWG

 (Nie-

derspannungsrichtlinie)

,  98/37/EG 

(EG  Maschinenrichtlinie)  und 

2000/14/EG

  (Geräuschrichtlinie)  entsprechen. 

Zur sachgerechten Umsetzung der in den EG-Richtlinien genannten Sicherheits- und Gesundheitsanforderungen 

wurden  folgende  Normen  und/oder  technische  Spezifi kation(en)  herangezogen:

  EN  55014-1,  EN  55014-2,  EN 

50144-1, EN 50144-2-15, EN 61000-3-2:1995, EN 61000-3-3: 1995, EN 774, EN 50366

.

gemessener Schallleistungspegel   

94,2 dB (A)  

garantierter Schallleistungspegel        

97,0 dB (A)  

Konformitätsbewertungsverfahren nach Anhang V / Richtlinie 2000/14/EG

DE

Münster,  03.11.2006 

  

                                                              Gerhard Knorr, Technische Leitung Ikra GmbH

                                                            CE-Konformitätsbevollmächtigter Mogatec GmbH

 Gerhard Knorr, Kärcherstraße  57, DE-64839 Münster

Summary of Contents for HSD 700 Prof



























Reviews: